Connecting The Power Cable - Pioneer AVD-W1100V Manual Del Propietário

Connecting the System

Connecting the Power Cable

Hide-away Unit
Power cable
Black (ground)
To vehicle (metal) body.
Fuse resistor
Red
To the electric terminal controlled by the ignition
Red/Gray
switch (12 V DC) ON/OFF.
Do not connect this lead to power source terminals
to which power is continuously supplied. If the lead
is connected to such terminals, the battery may be
drained.
Fuse holder (4A)
Yellow
To the terminal always supplied with power regard-
less of ignition switch position.
25