Fan Operation; Important; Care And Maintenance - Harbor Breeze PEH44BCW5MC Manual Del Usuario

FAN OPERATION

1. The pull chain located on the switch housing has
four positions to control fan speed. One pull is HIGH,
two is MEDIUM, three is LOW and four turns the fan
OFF. (Fig. 1)
2. The pull chain located in the center is used to turn
the light ON or OFF. (Fig. 2)
3. Use the fan reverse switch, located on the switch
housing, to optimize your fan for seasonal
performance. (Fig. 3) A ceiling fan will allow you to
raise your thermostat setting in summer and lower your
thermostat setting in winter without feeling a difference
in your comfort.
Note: Wait for fan to stop before moving the reverse
switch.
3A. In warmer weather, setting the reverse switch
in the DOWN position will result in downward
airflow creating a wind chill effect. (Fig. 3A)
3B. In cooler weather, setting the reverse switch in
the UP position will result in upward airflow that
can help move stagnant, hot air off the ceiling
area. (Fig. 3B)
IMPORTANT: Reverse switch must be set either
completely UP or completely DOWN for fan to
function. If the reverse switch is set in the middle
position (Fig. 3C), fan will not operate.

CARE AND MAINTENANCE

At least twice each year, lower motor housing (A) to check motor assembly (D), and then
tighten all screws on fan. Clean motor housing (A) with only a soft brush or lint-free cloth to
avoid scratching the finish. Clean blades (H) with a lint-free cloth. You may occasionally apply a
light coat of furniture polish to wood blades for added protection.
Important: Shut off main power supply before beginning any maintenance. Do not use water or
a damp cloth to clean the ceiling fan.
Switch
Housing
Switch
Housing
Fig. 3A
13
Fig. 1
Fig. 2
Fig. 3
Fig. 3B
Fig. 3C