Serpento COBRA Manual De Usuario página 116

CAUTION
The idle speed should be adjusted with the engine fully warming up.
Adjustment of the Throttle Cable Clearance
1. Loose the locking nu
2. Turn the adjuster so that the cable clearance is kept within a range of 0.5 - 1.0 mm.
3.Tighten the locking nut after adjusting the clearance.
CAUTION
After the adjustment of cable, check the grip to see if it can be turned normally. The idle speed should not be increased due to this adjustment.
The throttle grip should be able to turn freely.
50