Serpento COBRA Manual De Usuario página 117

• COBRA
MANUAL DEL USUARIO
Adjustment of the Clutch
Before the clutch is released, the cable clearance measured from the lever of clutch should be 4 mm. If the clearance fails to meet this
requirement, make an adjustment as the following method.
1. Loose the locking nut of clutch cable adjuster.
2. Turn the adjuster and allow it to the required clearance (4mm). 3.Tighten the locking nut.During this time, lubricate the cable with machine
oil.adjusting the clearance.
Adjustment of the Driving Chain
After running for every 1,000 km, adjust the tightness of driving chain so that the movable distance between the two chain sprockets is kept
within 20 --- 30mm.
51