Troubleshooting - Serpento COBRA Manual De Usuario

• COBRA
MANUAL DEL USUARIO
CAUTION
Check if the filter element has crack before or during cleaning. If any crack is found, change the filter element.
4. Reassemble the cleaned filter in the reverse order of removing. Make sure that the filter element is firmly installed in the specified position
and sealed properly.
Please use the special lubricant
Use leadless gasoline
Observe the abnormal sound of the engine

8. Troubleshooting

If it is not able to start the engine, check the following items
1.Check if the fuel in the tank is sufficient.
2.Check if the fuel flows to the carburetor through the tap.
3.Disconnect the fuel hose from the carburetor, turn the tap to ON position, and check if gasoline flows out of the hose.
4. Make sure the fuel has flown to the carburetor, then check the ignition system.
55