Serpento COBRA Manual De Usuario página 92

26
First 800 km
To 1,600 km
Over 1,600 km
Vary the Engine Speed
The engine speed should often be changed, instead of being kept steady, so that each component of the engine acquires a loaded pressure.
When the pressure is unloaded, the components will be cooled down. Such process contributes to the engagement of the components. In
order to ensure a fine fitness, it's important to give a load to each of the component in the trial riding. But remember that the engine must not
be overloaded.
Avoid Constant Low Speed
When the engine is running at a constant low speed, the components will be polished well but will not be fitted well. You may engage to different
gears to speed up, provided that the above speed limits are not exceeded. However, during the first 1,600km,never turn the throttle to the
maximum position.
Less than 5,000 rpm
Less than 7,500 rpm
Less than 10,000 rpm