Software Update Procedure - Bosch WBE 4510 Instructions De Réparation

Following the instructions given above it is possible to
reset the inserted machine code:
1. From the main page press F5 - F5 - F6;
2. press the keys ARROW UP - DOWN - UP;
3. insert the reset code (36443).
"
Now when restarting the board will ask to be activated
again with a setting code.
Robert Bosch GmbH
Software update procedure | WBE 4510 - WBE 4515 | 39
5.

Software update procedure

The new generation of bards introduced by Sicam
functions in Windows CE environment; this allows our
research and development department to update con-
tinuously the machines, and to solve eventual program-
ming errors and to add functionalities to the machine,
like translation in many different languages ore special
programs.
The updates are sent via USB memory stick or per
email.
Software update procedure:
4. Unzip the received file (install.zip);
5. Copy all the install folder in the USB stick;
6. connect the USB stick to the balancer;
7. start the machine;
8. wait for update loading;
9. repeat calibration of the machine.
en
|
1 695 655 167 2014-01-13