Dräger Polytron ® Repeater Wirelesshart; Sensors; Interfaces; Intended Use - Dräger Polytron 6100 EC WL Instrucciones De Uso

alarm and are not intended for the derivation of a safety task or action. The
alarms are non-latching. When alarm conditions are resolved, the alarm is no
longer displayed.
If alarm logic is used for countermeasures, implement alarm logic in the
controller.
®
3.2.2 Dräger Polytron Repeater WirelessHART
®
The Dräger Polytron Repeater WirelessHART
®
Polytron 6100 EC WLwithout measuring function.
3.3

Sensors

The gas detector is intended for use with the DrägerSensor
(electrochemical). Select the sensor according to the target gas to be
measured.
3.4

Interfaces

Interface
®
WirelessHART network
®
Bluetooth
3.5

Intended use

®
3.5.1 Dräger Polytron 6100 EC WL
The gas detector is used in conjunction with the built-in DrägerSensor
monitoring toxic gases and oxygen.
Instructions for use |
Dräger Polytron
®
®
is a version of the Dräger
®
EC
Connection via the network (see "Network
integration", page 47).
®
Connection to a Windows terminal device
®
in the field (see "Bluetooth interface",
page 42).
®
®
6100 EC WL, Dräger Polytron
3.5.2 Dräger Polytron
The repeater is used to forward data from other WirelessHART
participants.
3.6

Approvals

The approvals are shown on the name plate. A copy of the name plate and the
declaration of conformity can be found in the document "Notes on Approval"
(order no. 93 00 532).
4

Operation

Task
Activate the Blue-
®
tooth interface.
Reset the gas
detector.
Reset the battery
counter.
If the gas detector is operated by a battery, do not remove the battery box
during configuration.
for
®
Repeater WirelessHART
®
Repeater WirelessHART
® ®
Bluetooth WirelessHART
(PolySoft) network
(DD/DTM)
-
®
| en
Operation
®
®
network
Magnetic pen
41