Jocel JFE011183 Manual De Instrucciones página 54

Electrical connection
Warning!
All electrical work should be carried out by a suitably qualified
and authorized electrician.
No alterations or willful changes in the electricity supply should
be carried out.
Fitting guidelines
The oven is manufactured to work with three-phase alternating
current (220V-240V/50Hz).The connection diagram is also
found on the cover of the connection box.
Remember that the connection wire should match the
connection type and the power rating of the oven.
The connection cable must be secured in a strain-relief clamp.
Warning!
Remember to connect the safety circuit to the connection box
terminal marked with .The electricity supply for the oven
must have a safety switch which enables the power to be cut
off in case of emergency. The distance between the working
contacts of the safety switch must be at least 3 mm.
Before connecting the oven to the power supply it is important
to read the information on the data plate and the connection
diagram.
-50-