Operation - Jocel JFE011183 Manual De Instrucciones

OPERATION

Selecting manual operation mode
After your appliance is connected to your mains supply for the first time, the numbers on the
timer display will flash. Before you can select a cooking function or set a temperature, you must
set the appliance into "manual operation" mode.
To select manual operation mode, press the manual operation button (9) on the control panel.
Setting the time of day. After setting your oven for manual operation, you should also set the
time of day.
After pressing the manual operation button (9), use the minus button (10) and plus button (11)
to adjust the time that appears in the display. After getting the display to the correct time,
release the minus and plus buttons. After a few seconds the time will fix in the display and you
will be able to use your oven.
The oven timer
Only the minute minder can be used with the defrost oven function. None of the other timer
modes will work with the defrost function.
Setting the minute minder function
You are able to set the minute minder at any time, regardless of whether an oven function has
been selected. You can set a period of time using the minute minder function and an alarm will
sound when that period of time has elapsed.
Press the minute minder button (6), the display will show a value of 00:00. Set the period of time
that you wish the minute minder to countdown for, by using the minus (10) and plus (11)
buttons.
Once the display has got to your desired countdown time, let go of the minus and plus buttons.
The minute minder symbol (13) will appear on the timer display.
Once a countdown time has been set, it is possible to shorten or lengthen the time by using the
minus or plus buttons.
An alarm will sound when the countdown time has elapsed. The alarm can be silenced by
pressing the minute minder button.
lmportant: The oven will continue to heat once the alarm has been silenced. If you have
finished cooking, then you should turn the oven function selector and thermostat control knob to
0.
Setting the duration function
This function will allow you to set a countdown time similar to the minute minder function.
However the oven will no longer continue to heat, once the countdown period has elapsed.
-51-