Babyauto Kulixka SAVILE V7 Manual De Uso página 22

4. Make sure the vehicle's safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle's
safety belt or prevent the installation of the seat in any way. To
release your child unbuckle the vehicle safety belt as described in
the instructions.
Ensure that the belt has no slack.
4. HOW TO INSTALL THE CHILD CAR SAFETY SEAT. GROUP 2 & 3.
WARNING
Before installing the seat it is necessary to remove harness straps,
crotch straps and lap straps (Chapter 6).
1. Place the child seat on the seat of the vehicle, ensuring it is pressed
firmly against the back of the vehicle seat, if necessary use rotary
knob to recline back (4.1).
2. Place the child in the child restraint seat (4.2).
3. Fasten the belt, ensuring that the lap belt goes through
under both armrests and that the diagonal shoulder belt passes
through A
it "clicks", making sure the child seat is properly installed (4.3 &
4.4).
4. Make sure the vehicle's safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle seat
belt or prevent the installation of the seat in any way. To release
your child unbuckle the vehicle safety belt as described in the
instructions.
Ensure that the belt has no slack.
22 Child restraint system
guide. Fasten the seat belt into the vehicle´s buckle until
Use Group 2&3 only from approx.
4 to 12 years of age (15-36 kg)
E guide
KULIXKA