4. Use the screwdriver to remove the bolts from the inner side of the
base, then pull out the backrest and replace the base cover (6.10 &
6.11).
5. Turn the knob clockwise,take back the plastic part of base inner car
seat (6.12 & 6.13).
7. CLEANING AND MAINTENANCE
Remove the backrest cover
1. Release the elastic strap from the seat backrest, slide the cover,
and remove the cover from the backrest. Now you can wash the
covers.
Removing the elevator cover.
1. First separate the backrest from the elevator. Release the elastic
strap and remove the cover. Now you can wash the covers.
Cleaning the seat
1. Wash the straps and plastic parts with neutral detergent and
warm water.
2. Ensure that no soap enters the buckle or metal parts.
3. Do not use chemicals or bleach on any part of the chair.
4. Dry thoroughly before use.
If you have any question about using or installing this product, or if you
need a spare part contact our Customer Service.
Group 1/2/3
WASHING INSTRUCTIONS:
· The cover is removable and washable at 30º.
Dry in the fresh air only.
· Wash in washing machine (cold).
· Do not use bleach.
· Dry clean, with any solvent except
trichloroethylene.
· Do not use dryer.
· Do not iron.
www.babyauto.com
EN
25