Maximum Output Voltage; Supporting Materials; Consumables; Specifications And Technical Characteristics - WEM SS-200E Manual De Utilización

Models Code
TU-28 04777
AD-20 08952
AD-19 08951
ES-13 04773
BC-11 06005
MC-05 03031
MC-07 04770
MC-08 04771
PC-07 03029
PC-08 03129
AD-18 08949
Note 1: See item 8 for cleaning and sterilization methods.
Note 2: All disposable goods have a separated ANVISA registration.
Use of accessories and cables that are not specified in this manual is the user's full responsibility and may result in
increased emission or decreased immunity of equipment.
Use only instruments that are able to bear the maximum output voltage (peak) at each output mode, as informed in item
below. Using an instrument having a maximum nominal voltage lower than the maximum output voltage may result in injuries
to the patient and/or operator and damage to equipment.
All WEM accessories have a maximum nominal voltage higher than the maximum output voltages of WEM electrosurgical
units line, being therefore fully compatible.
Information on maximum nominal voltage of instruments other than WEM instruments must be obtained from the accessory
manufacturer.
1.6.2 – Maximum output voltage
Mode Voltage (Volts)
Cut 1300
Blend 1 1800
Blend 2 2100
Blend 3 2050
Ecut 1 2944
Ecut 2 3000
Ecut 3 3128
Ecut 4 2944
Spray 3000
Contact 3000
Bipolar 260
1.6.3 – Supporting materials
User Manual.
List of Authorized Technical Assistance Units
1.6.4 – Consumables
Not applicable.
1.7 – Specifications and technical characteristics
Classification (ANVISA)
Classification (Directive 93/42/EC)
Equipment dimensions
(Front x Height x Depth)
Occupied area
Packing dimensions
Packing type
Net weight
Gross weight
Mains voltage range
Mains frequency
Description
Transport unit for high power microprocessed electrosurgical unit
HF120/SS200E
Adapter for Valleylab patient plate cable (or to E0560 cable) to WEM
Electrosurgical Unit
Adapter for monopolar laparoscopy cables with pin from 4 to 8 mm to
WEM Electrosurgical Units
Handpiece, footswitch control, 3 m cable, autoclavable, 4mm pin
Bipolar cable for bipolar forceps (female flat/European), 3m, WEM
connector 2 pin Ø 4mm
Monopolar cable for monopolar forceps, 3m, 4mm covered pin,
compatible with MF500 forceps
Monopolar cable for laparoscopy procedures, 3m, autoclavable, 4mm
covered pin
Monopolar cable for endoscopy procedures (snares and knifes), 3m,
4mm covered pin
Patient cable for adhesive patient plates, 3m, WEM connector 2 pin Ø
4mm, 24mm plate port
Patient cable for stainless steel plate, 3m, reusable, WEM connector 2
pin Ø 4mm
Adapter for monopolar universal port
WARNING
Class III
Class IIb
Front: 245 mm
Height: 150 mm
Depth: 260 mm
3
0.010 m
0.29 X 0.37 X 0.45 m
Cardboard
3.5 Kg
6.4 Kg
100 - 240 VAC with automatic voltage selection
50 / 60 Hz
Sterilization
N/A
N/A
N/A
N/A
See note 1 below
See note 1 below
See note 1 below
See note 1 below
N/A
N/A
N/A
WEM / SS-200E User Manual
Rev. 11
11