Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment; Machine Assembly - RIDGID 1210 Manual Del Usuario

1210 Oil-less Threading Machine
Description, Specifications and

Standard Equipment

Description
The RIDGID Model 1210 Oil-Less Threading Machine is
an electric motor-driven machine that centers and chucks
pipe and rotates it while cutting, reaming and threading
operations are performed. Threading dies are mounted
in a quick-opening die head. An integral coolant system
is provided to reduce the temperature of the workpiece
and lubricate it during the threading operation.

Specifications

Threading Capacity .......Pipe
Cut-Off Capacity............Pipe
Operating Speed ...........25 RPM (No Load)
Motor:
Type ............................Universal
Volts ............................115V Single Phase AC
50-60 HZ
Amps ...........................6.4
Controls .........................ON/OFF Toggle Switch and
ON/OFF Foot Switch
Chuck ............................Hammer-Style with
Replaceable Inserts; Cam
Action Rear Chuck
Coolant System .............16 Oz. Integral Coolant
Reservoir with Gerotor Pump
Weight ...........................59 lbs.
Standard Equipment
(Figure 1)
• Model 610 Quick-Opening Die Head,
" – " Oil-less Gold NPT Dies
• 1 / 3 /
2 4
• 1" Oil-less Gold NPT Dies
• Model 334 Blade-Type Reamer
• Model 354 Roll-Type, Self-Centering Cutter
• 1 Quart RIDGID Thread Cutting Coolant
4
" through 1"
1 /
2
" through 1"
1 /
2
" – 1" NPT
1 /
2
Ridge Tool Company
Cutter
Chuck
Handwheel
Rear Centering
Device
Carrying
Handle
ON/OFF
Switch
Reservoir
Vent Cap
Foot Switch Clip
Figure 1 – 1210 Threading Machine

Machine Assembly

WARNING
To prevent serious injury, proper assembly of the
Threading Machine is required. The following pro-
cedures should be followed:
The 1210 Threading Machine can be used on a bench or
mounted to the Model 120 Stand. The No. 120 Stand is
a three-legged folding stand (Figure 2). Guide/pin as-
semblies are mounted on top of each leg to hold the
1210 Threading Machine in place.
Die Head
Reamer
Carrying
Handle
Carriage
Handwheel
Foot
Switch
Coolant Level
Sight Glass