Honda ER2500CX Manual De Explicaciones página 26

4.Move the choke lever to the
CLOSED position to start a cold
engine.
Leave the choke lever in the
OPEN position to restart a warm
engine.
5.Turn the engine switch to the
ON position.
6.Pull the starter grip lightly until
you feel resistance, then pull
briskly in the direction of the
arrow as shown.
• Do not allow the starter grip
to snap back against the
generator. Return it gently to
prevent damage to the starter.
• Do not let the starter rope rub
against the generator body,
or the rope will wear out
prematurely.
7.If the choke lever was moved to
the CLOSED position to start
the engine, gradually move it to
the OPEN position as the engine
warms up.
CHOKE LEVER
CLOSED
OFF
ENGINE SWITCH
Direction to pull
STARTER GRIP
CHOKE LEVER
OPERATION
OPEN
ON
OPEN
23