Engine Oil Change - Honda ER2500CX Manual De Explicaciones

Ocultar thumbs Ver también para ER2500CX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SERVICING YOUR GENERATOR

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1.Place blocks under the generator, and check that the generator is in a
suitable and level position.
2.Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap, drain plug, and sealing washer.
3.Allow the used oil to drain completely, and then reinstall the drain
plug and a new sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
36
BLOCKS

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido