Transporting; Before Transporting; When Transporting The Generator - Honda ER2500CX Manual De Explicaciones

Ocultar thumbs Ver también para ER2500CX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TRANSPORTING

BEFORE TRANSPORTING

1.Make sure the engine switch, fuel valve are OFF (see page 24).
2.Drain all gasoline from the fuel tank and carburetor (see page 46).
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Stop the engine and keep heat, sparks,
• Handle fuel only outdoors.
• Wipe up spills immediately.

WHEN TRANSPORTING THE GENERATOR

If the generator has been running, allow the engine to cool down
before loading the generator on the vehicle.
A hot engine and exhaust system can burn you and can ignite some
materials.
Do not load the generator on a vehicle to transport with the fuel filled.
The fuel may leak due to vibration during transport.
When transporting the generator, turn the engine switch and the fuel
valve lever OFF, and Keep the generator level to reduce the possibility
of fuel leakage.
Avoid a place exposed to direct sunlight when putting the generator on
a vehicle. If the generator is left in an enclosed vehicle for many hours,
high temperature inside the vehicle could cause fuel to vaporize
resulting in a possible explosion.
Do not drive on a rough road for an extended period with the generator
on board.
and flame away.
49

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido