Maintenance And Troubleshooting; Safety Information Relating To Maintenance And Troubleshooting; Maintenance Plan - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Maintenance and troubleshooting

Maintenance plan

6 Maintenance and troubleshooting

6.1 Safety information relating to maintenance and troubleshooting

Improperly performed maintenance
and troubleshooting
6.2 Maintenance plan
Maintenance intervals
108
WARNING!
Risk of injury due to improperly performed mainte-
nance and troubleshooting work!
Improper maintenance and troubleshooting work can
lead to injury and property damage.
–
–
–
–
The following sections describe the maintenance work necessary
for optimum, faultless operation of the linear unit.
If increased wear is noticeable during regular inspections, shorten
the required maintenance intervals according to the actual signs of
wear.
If you have any questions about the maintenance work and inter-
vals, contact the manufacturer
Maintain components provided by the operator regularly according
to the specifications provided by the respective manufacturers.
Linear unit RK MonoLine R/RK MonoLine Z
Before starting work, ensure that there is sufficient
space for assembly.
Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
If components have been removed, ensure that
they are assembled correctly, reinstall all the fixing
elements and adhere to the screw tightening tor-
ques.
Observe the following before re-commissioning:
– Ensure that all maintenance and trouble-
shooting work has been performed and com-
pleted according to the specifications and infor-
mation in this manual.
– Ensure that nobody is still in the danger zone.
Ä Page 70.
26.03.2019