Assembling The Inductive Limit Switch - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Assembly
Assembling optional modules > Assembling the limit switch
5.4.4.2

Assembling the inductive limit switch

Applicable to
Assembling the limit switch
Fig. 36: Assembling the limit switch
Adjusting the operating distance
Fig. 37: Adjusting the operating dis-
tance
Connecting the limit switch
106
Version
Size
Personal:
Schutzausrüstung:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Insert and position the slot stones (Fig. 36/1) in the slot of the
guide profile.
2. Place the limit switch (Fig. 36/3) along with a mounting
bracket (Fig. 36/4) at the height of the inserted slot stones.
3. Tighten 2 screws (Fig. 36/2):
Size
40
60, 80, 120 M4
4. Use the hexagon nuts (Fig. 37/1) to set an operating distance
of 2 mm between the inductive limit switch (Fig. 37/2) and the
roller bolt (Fig. 37/3).
5. Have a qualified electrician connect the inductive limit switch
according to the circuit diagram.
ð The limit switch is assembled and connected.
Linear unit RK MonoLine R/RK MonoLine Z
RK MonoLine R, Z
40/60/80/120
n Assembly staff
n Qualified electrician
n Protective clothing
n Protective gloves
n Safety shoes
Screw size
M4
Tightening torque [Nm]
1.5
2
26.03.2019