Staff Requirements - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Additional operator obligations

2.5 Staff requirements

Insufficient qualification
Authorised staff
26.03.2019
n The operator must ensure that all persons handling the linear
unit have read and understood this manual. Furthermore, they
must regularly train the staff and inform them of the hazards.
The operator must ensure that the staff have been trained in
compliance with the required staff qualifications.
The operator must provide the staff with the required protective
n
equipment and must issue the mandatory order to wear the
required protective equipment.
The operator must ensure that danger zones occurring during
n
assembly, operation, troubleshooting, maintenance and
cleaning of the linear unit are secured.
The operator is further responsible for ensuring that the linear unit
and the place of use are in a technically perfect condition at all
times. Therefore, the following applies:
n The operator must ensure the required clearances and suffi-
cient lighting for safe working, as well as ensuring that the
linear unit and the place of use are kept permanently clean and
tidy.
n The operator must ensure that the maintenance intervals
described in this manual are adhered to.
Ä "Maintenance plan" on page 109
n The operator must ensure that the maintenance intervals of the
subcontracted components are adhered to.
Ä "Other applicable documents" on page 69
The operator must ensure that the generally valid safety and
n
accident prevention regulations at the place of use are adhered
to.
n The operator must ensure that all work on the linear unit is car-
ried out in a sufficiently air-conditioned room in which an exces-
sively hot or cold work environment is not expected.
WARNING!
Danger in the event of insufficiently qualified per-
sons!
Insufficiently qualified persons are unable to assess
the risks associated with handling the linear unit and
thus put themselves and others at risk of severe or
fatal injury.
–
–
The different tasks described in this manual require the persons to
whom the tasks were assigned to have different qualifications.
Linear unit RK MonoLine R/RK MonoLine Z
Only have suitably qualified persons carry out all
work.
Insufficiently qualified persons must be kept away
from the work area.
Safety
Staff requirements
81