Assembling The Centring Sets - RK Rose+Krieger MonoLine R Instrucciones De Montaje

5.4.5 Assembling the centring sets

Applicable to
Assembling the centring sets
26.03.2019
Version
Size
Personal:
Schutzausrüstung:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
Fig. 38: Assembling the centring sets
A Centring set for RK MonoLine R, Z 40
B Centring set for RK MonoLine R, Z 60/80/120
1. Place the centring sets (Fig. 38/1) in the holes of the guide
carriage provided for this purpose.
2. Tighten the screw (Fig. 38/2):
Size
40, 60, 80,
120
ð The centring sets are assembled.
Linear unit RK MonoLine R/RK MonoLine Z
Assembling optional modules > Assembling the centring sets
RK MonoLine R, Z
40/60/80/120
Assembly staff
n
n Protective clothing
n Safety shoes
Centring set B is delivered with 2 screws. Use
the screw which corresponds to the slot's depth.
Screw size
M4
Assembly
Tightening torque [Nm]
2
107