RK Rose+Krieger MonoLine R Instrucciones De Montaje página 110

Maintenance and troubleshooting
Lubricating the guide shaft
Lubricating the guide shaft
Cleaning the lubrication point
Fig. 39: Lubricating the guide shaft
Lubricating the guide shaft
110
Personal:
Schutzausrüstung:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Clean the lubrication points (Fig. 39/1) on both sides of the
guide carriage (Fig. 39/2).
2.
Place the oil press on the lubrication nipples (Fig. 39/1) on
both sides of the guide carriage (Fig. 39/2) one after the
other and lubricate the guide carriage.
3. Move the guide carriage (Fig. 39/2) several times to distribute
the lubricant evenly.
ð The guide shafts are lubricated.
Linear unit RK MonoLine R/RK MonoLine Z
n Assembly staff
n Protective clothing
n Safety goggles
n Protective gloves
Safety shoes
n
Ensure that the oil press is axially aligned to the
lubrication nipple's direction of flow.
26.03.2019