Safety
Personal protective equipment
Staff qualifications
2.6 Personal protective equipment
82
Only persons who can be expected to reliably complete the tasks
are approved for all work. Persons whose reactions are impaired
due to drugs, alcohol or medication, for example, are not approved.
In this manual, the following staff qualifications are listed for the dif-
ferent tasks:
Assembly staff
The assembly staff are the persons tasked by the operator with the
assembly, maintenance and troubleshooting of the linear unit and
its options. The operator must ensure that the staff deployed are
qualified to carry out the assembly work.
Based on their professional training, knowledge and experience, as
well as their knowledge of the relevant regulations, the assembly
staff must be capable of carrying out work assigned to them and of
independently identifying and avoiding potential hazards.
The assembly staff are specifically trained for the area of responsi-
bility they work in and are aware of the relevant standards and reg-
ulations.
Qualified electrician
Based on their professional training, knowledge and experience, as
well as their knowledge of the relevant standards and regulations,
the qualified electrician must be capable of carrying out work on
electrical systems and of independently identifying and avoiding
hazards.
The qualified electrician is specifically trained for the work environ-
ment they work in and is familiar with the relevant standards and
regulations.
RK Rose+Krieger GmbH
Certain work may only be carried out by RK Rose+Krieger GmbH
specialist personnel. Other staff are not authorised to perform this
work.
Contact our Customer Service to have the necessary work carried
out.
Personal protective equipment is used to protect persons from their
safety and health being put at risk during work.
During the different tasks, staff must wear personal protective
equipment which is indicated separately in the individual sections
of this manual.
Linear unit RK MonoLine R/RK MonoLine Z
26.03.2019