Assembling The Synchronisation Shaft (With Protective Tube) - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Assembly
Assembling optional modules > Assembling the synchronisation shaft
5.4.2.2

Assembling the synchronisation shaft (with protective tube)

Applicable to
Assembling the intermediate plate
Fig. 24: Assembling the intermediate
plate
100
Size
40
60, 80
120
ð The synchronisation shaft is assembled.
Version
Size
Personal:
Schutzausrüstung:
Prerequisites:
n The electric gear unit and/or motor (if available) are secured
against restarting.
n Linear units to be connected must be fixed in the substrate.
The synchronisation shaft for the RK MonoLine Z 60
and Z 80 does not require the first step because it is
not equipped with an intermediate plate.
1. Place the intermediate plate (Fig. 24/1) on the pulley box
(Fig. 24/2) of both linear units.
2. Tighten 4 screws each (Fig. 24/3), alternating diagonally:
Size
40
120
Linear unit RK MonoLine R/RK MonoLine Z
Screw size
M3
M6
M8
RK MonoLine Z
40/60/80/120
Assembly staff
n
n Protective clothing
n Protective gloves
n Safety shoes
Screw size
M5
M8
Tightening torque [Nm]
1.4
10.5
25
Tightening torque [Nm]
4
25
26.03.2019