Assembling Optional Modules; Assembling The Motor - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Assembly
Assembling optional modules > Assembling the motor
Fixing slot stones

5.4 Assembling optional modules

5.4.1 Assembling the motor

Applicable to
Assembling the screw-in hub
Fig. 17: Assembling the screw-in hub
96
NOTICE!
The slot stones have a limited screw-in depth!
–
–
3. Carefully tighten the screw for every slot stone:
Size
40
60, 80, 120 M8
ð The linear unit is assembled on the substrate.
Version
Size
Personal:
Schutzausrüstung:
Prerequisite:
The electric gear unit and/or motor (if available) are secured
n
against restarting.
1. Place the coupling's screw-in hub (Fig. 17/2) on the timing
belt shaft (Fig. 17/1).
2. Tighten 4 screws (Fig. 17/3) alternating diagonally.
Size
40
60, 80, 120 M8
Linear unit RK MonoLine R/RK MonoLine Z
Adjust the size and length of the screws to the slot
stones used.
Never screw the screws in as far as the bottom of
the slot stone(s).
Screw size
M6
RK MonoLine Z
40/60/80/120
Assembly staff
n
n Protective clothing
n Protective gloves
n Safety shoes
Screw size
M4
Tightening torque [Nm]
10
25
Tightening torque [Nm]
4.2
40
26.03.2019