Optional Modules; Motor And Motor Adapter Kit; Synchronisation Shaft - RK Rose+Krieger MonoLine R Instrucciones De Montaje

Set-up and function
Optional modules > Synchronisation shaft

3.3 Optional modules

3.3.1 Motor and motor adapter kit

Fig. 5: Motor and motor adapter kit

3.3.2 Synchronisation shaft

88
1 Motor
2 Motor plate
3 Coupling housing
4 Coupling
The motor is assembled on the pulley box using a motor adapter
and a coupling.
The motor adapter consists of the coupling housing and the motor
plate.
Further information:
n Assembling the motor
Fig. 6: Synchronisation shaft
A Synchronisation shaft (without protective tube)
B Synchronisation shaft (with protective tube)
The synchronisation shaft is assembled on the pulley box by
means of a coupling and transmits torques to a linear unit arranged
in parallel.
Further information:
n Assembling the synchronisation shaft
Linear unit RK MonoLine R/RK MonoLine Z
Ä Page 96
Ä Page 99
26.03.2019