Assembly Preparation; Assembly Instructions; Installing The Fan Batteries; Inserting The Inner Shell - Pit Boss PBCSL200 Instrucciones Y Uso

Parts are located throughout the shipping carton, including underneath the grill. Inspect
the grill and parts after removing from the protective shipping carton. Discard all packaging
materials from inside and outside of the grill before assembly, then review and inspect all
parts by referencing the parts list. If any part is missing or damaged, do not attempt to
assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss
Customer Service for parts: Monday through Sunday, 4am - 8pm PST (EN/FR/ES).
Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
Tools required for assembly: none
1.

INSTALLING THE FAN BATTERIES

Parts Required:
1 x Grill Body (#7)
4 x AA Batteries (not included)
Installation:
• Place the grill body on a clean, level
surface. Tip the unit backwards (or
flip over) and remove the battery
compartment cover. Install four
batteries, and replace cover.
2.

INSERTING THE INNER SHELL

Parts Required:
1 x Inner Shell (#6)
Installation:
• Insert the inner shell into the grill
body. The rimmed lip of the inner
shell will rest on the edges of the
grill body.

ASSEMBLY PREPARATION

service@pitboss-grills.com

ASSEMBLY INSTRUCTIONS

1
2
7
6
7
7