Import certificates: Insert the USB storage device that contains the certificates. Verify that the
certificates on the system plus those on the USB storage device do not exceed 20 certificates. Delete
certificates if necessary. Then select Import on-screen.
Delete certificates: Select the certificates to delete, and select Delete.
3 Select Back on-screen.
4 Select Done on-screen.
5 Restart the system.
Wireless specifications
Wireless USB Dongle (Panda)
The Wireless USB Dongle uses the Industrial, Scientific, and Medical (ISM) frequency bands from 2.412 to
2.4835 GHz, depending on your country's regulation. The dongle implements the following methods of
transmission:
IEEE 802.11 b/g: Peak rate 54 Mbps, Peak throughput: 27 Mbps
IEEE 802.11n:
1 T1 R. Peak rate: 150 Mbps, Peak throughput: 90 Mbps
1 T2R. Peak rate: 300 Mbps, Peak throughput: Rx 160 Mbps
2T2R. Peak rate: 300 Mbps, Peak throuohput: Rx 260 Mbps
Wireless and Security Module (Laird)
The Wireless and Security Module uses the Industrial, Scientific, and Medical (ISM) frequency bands from
1.400 to 2.4835 GHz, and from 5.100 to 5.800 GHz. The module implements four different methods of
transmission:
IEEE 802.11a with Orthogonal Frequency Division Multiplexing (OFDM) at 11 dBm ± 2 dBm @ 54 Mbps
IEEE 802.11b with Direct Sequence Spread Spectrum (DSSS) at 16 dBm ± 2.0 dBm @ 11 Mbps
IEEE 802.11g with Orthogonal Frequency Division Multiplexing (OFDM) at 13 dBm ±2.0 dBm @ 54 Mbps
IEEE 802.11n with Orthogonal Frequency Division Multiplexing (OFDM) at 12 dBm ± 2.0 dBm (802.11gn)
@ MCS7
6
Wireless specifications