Descargar Imprimir esta página

Montblanc MB M13.21 Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
26
Calibre MB M66.26
Chronographe Monopoussoir 1/1000th
Available in the TimeWalker Collection
G
A
C
E
A:
Hours hand
B:
Minutes hand
C:
Small-seconds disc
D:
Chronograph direct-drive seconds hand
(1/100th)
P1
B
H
D
F
E:
Seconds-counter hand
F:
Minutes-counter hand (15 min)
P1: Monopusher
H:
Chronograph power reserve
G:
1/1000th counter hand
Crown
1: Running and manual winding position. To rewind the time-display mechanism, rotate the crown clockwise
To rewind the chronograph, rotate the crown anticlockwise
resistance.
2: Setting the time.
Pull the crown out to position 2 to set the time. You can turn the crown in either direction.
Chronograph function
The timepiece features a chronograph mechanism that allows measurement of intervals from 1/1000th of a second
to 15 minutes. For this purpose, it uses a 1/1000th counter hand (G), 1/100th chronograph direct-drive seconds
hand (D), a seconds-counter hand (E) and a minutes-counter hand (F). It is a monopusher chronograph, i.e. the start,
stop and zero-reset functions are activated as you repeatedly press the monopusher (P1).
P1: a) Starting the chronograph
Check that the chronograph function has sufficient autonomy via the power reserve display (H).
Press the monopusher to set the chronograph function in motion. The direct-drive seconds hand (D), seconds-
counter hand (E), minutes-counter hand (F) and power-reserve counter hand (H) are working. The 1/1000th
counter hand (G) remains neutral until the chronograph is definitively stopped, at which point it will be
possible to read the 1/1000th of a second.
b) Stopping the chronograph
Press the monopusher (P1) again to stop the chronograph function. The time elapsed can be read. Begin by
first reading the minutes-counter hand (F), then the seconds-counter hand (E) and the 1/100th hand (D), and
finally the 1/1000th counter hand (G).
c) Resetting the chronograph to zero
After you have completed the measurement, press the monopusher (P1) a third time to reset the 1/1000th
counter hand (G), the chronograph direct-drive seconds hand (D), the seconds-counter hand (E) and the
minutes-counter hand (F) to zero.
27
.
. Stop turning the crown once you feel

Publicidad

loading

Productos relacionados para Montblanc MB M13.21