Montblanc MB M13.21 Manual Del Usuario página 16

30
Calibre MB R200
Chronographe Nicolas Rieussec
Available in the Star Legacy Collection
A
F
P
D
A: Hours hand (local time)
B: Minutes hand
C: Hours hand (home time)
D: Seconds counter (60 seconds)
E: Minutes counter (30 minutes)
B
C
G
E
F: Day/Night display (synchronised with
home time)
G: Date (synchronised with local time)
P: Monopusher
Crown
1: Position for running and manual winding. To rewind the watch, rotate crown clockwise
2: a) To set the watch
Pull the crown into position 2 to move the hours hand of the second time zone (local time (A)) so that
it is superimposed on the hours hand (home time (C)). Pull the crown out to position 3 to stop the
movement. Set the desired time. The day/night display (F) is synchronised with home time (C) and will
indicate, for example, whether it is 3 a.m. or 3 p.m.
b) Setting the date
Pull the crown into position 2 and rotate it clockwise
synchronised with local time (hours hand (A)).
3: Adjustment of home time
The movement stops and both hours hands remain together while the minutes hand is set. The day/night
display (F) follows.
To set the second time zone (local time (A)).
Pull the crown into position 2 and rotate it clockwise
hours hand will jump from hour to hour until the desired time is set. The date follows, but home time does
not, and the movement does not stop.
Functions
P1: Monopusher. Press repeatedly for access to the start, stop and zero-reset functions. One press on the
push-piece starts the seconds disc. Another press stops the mechanism to allow reading of the time on the
seconds disc and the 30-minute counter. A third press resets both counters to zero: the watch is ready to
time the next action.
.
or anticlockwise . The date is
or anticlockwise . The second time zone
31