Bp Measurement - Gima CONTEC08A-VET Manual Del Usuario

9.3 BP Measurement

In order to measure accurately, pay attention to applying the cuff properly. Select a proper cuff according to different ani-
mals, then select proper cuff type(large, middle and small).
There are two ways to select the cuff mode, in the time interface, press CUFF button to switch cuff mode; or enter the
[SYSTEM SETUP] submenu in [SYSTEM MENU], and complete switching in [CUFF TYPE] item.
Note
When the animals is a newborn, please select the small cuff mode and select the appropriate size of the cuff to
measure, otherwise it may cause harm to the animals.
1. Press [START/STOP] button to start measurement.
During measurement, please keep correct pose and quiet state, do not move.
If you want to abort the measurement, Press [START/STOP]; button, the device will stop inflating, and release the air
from the cuff.
2. Confirm the Measurement Value
ENGLISH
60