Chapter 12 Spo 2 Measurement Method - Gima CONTEC08A-VET Manual Del Usuario

Chapter 12
SpO MEASUREMENT METHOD
2
(This chapter is only suitable for European Union market)
1) Put the animal tongue enough into the animal nip of probe as the following figure.
SpO
Place 2 probe
2) Plug the connector of the SpO
switch to SpO interface. This operation brings no affection to other functions.
2
Note
SpO display range: 0% ~ 100%, PR display range: 30 bpm (beats/min) ~ 250 bpm (beats/min)
2
If the SpO works abnormally, after connecting the SpO
2
face or no data displayed under the SpO
Measurement Limitation
During operation, the accuracy of SpO
• High-frequency electromagnetic interference such as interference from electrosurgical apparatus connected to the sys-
tem.
• Intravenous dyestuff.
ENGLISH
probe cable into the USB socket in the lower right of the device. The main interface will
2
interface.
2
readings can be affected by:
2
probe to the device, the device will not switch to the SpO
2
66
inter-
2