Pp Black 9/16" Large Head Screw; Black 1-7/8" Flat Head Screw - Sauder Shoal Creek 409714 Manual Del Usuario

Step 16
Carefully stand your unit upright.
å
To insert the drawers into your unit, tip the front of the drawer down and
å
drop the rollers on the drawer behind the rollers on the unit. Lift the front
of the drawer up and slide it into the unit.
We recommend using the SAFETY BRACKET (WW) for added stability.
å
Use a BLACK 9/16" LARGE HEAD SCREW (PP) into the top of the unit
and a BLACK 1-7/8" FLAT HEAD SCREW (XX) into a stud in your wall.
Apply the WARNING LABEL (KK) to the upper DRAWER BOTTOM (N).
å
You should be able to read the label when the drawer is open. When the
drawer is closed, it will hide the label. Peel off the backing and apply the
label as shown in the diagram.
NOTE: This is a permanent label intended to last for the
å
life of the product. Once applied, do not try to remove it.
KK
www.sauder.com/services
40 lbs.
20 lbs.
N
35 lbs.
35 lbs.
35 lbs.

BLACK 1-7/8" FLAT HEAD SCREW

(1 used into a stud in your wall)
WW
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
409714
Pro Tip: Lift with your
legs. And, you know,
your arms.
XX
PP
WARNING
Page 21