JVC BD-X201MS Manual De Instrucciones página 10

Component Names & Functions
Front Panel (continued)
7Video input indicators
OPTION indicator
This indicator is lit up or flashes when INPUT SELECT
from the INPUT SELECT MENU screen has been set to
OPTION. (This setting cannot be carried out using the DVD
recorder alone.)
DV indicator
This indicator is lit up or flashes when INPUT SELECT
from the INPUT SELECT MENU screen has been set to
DV. Specifically, the indicator is lit up when an input signal
is present, and it flashes when no signal is present.
Y/C indicator
This indicator is lit up or flashes when INPUT SELECT
from the INPUT SELECT MENU screen has been set to Y/
C. Specifically, the indicator is lit up when an input signal is
present, and it flashes when no signal is present.
LINE indicator
This indicator is lit up or flashes when INPUT SELECT
from the INPUT SELECT MENU screen has been set to
LINE. Specifically, the indicator is lit up when an input sig-
nal is present, and it flashes when no signal is present.
8Phones jack and volume adjuster
The phones jack allows headphones to be connected to
the DVD recorder for monitoring of audio levels; in addition,
the headphone volume can be adjusted using the volume
adjuster. Note that this adjuster has no effect on the actual
recording levels.
9REV button and indicator
• Press this button during playback or fast-forward mode
to start fast-reverse play. If pressed during fast-reverse
play, this button toggles the speed of fast-reverse play
between low speed and high speed.
• Press this button in still mode or during slow-forward
play to start slow-reverse play. If pressed during slow-
reverse play, this button toggles the speed of slow-
reverse play between low speed and high speed.
• The REV indicator is lit up during fast-reverse and slow-
reverse play.
E-10
All manuals and user guides at all-guides.com
8
9 0 a b c
7
0STOP button
• This button has the following effect when pressed in
Recording or Recording Pause mode.
If EDIT MENU from the DVD MENU screen is set to DIS-
ABLE, the DVD recorder stops recording (i.e., it per-
forms title closing).
If EDIT MENU from the DVD MENU screen is set to
ENABLE, the DVD recorder stops recording and the
THUMBNAIL EDIT screen is displayed. It will then be
possible to modify the chapter menu.
• When the STOP button is pressed in Playback mode,
the DVD recorder stops playback.
aPLAY button and indicator
• If this button is pressed together with the REC button
while a recordable disc is inserted into the DVD
recorder, recording will be started.
• When the PLAY button is pressed in Recording Pause
mode, the DVD recorder restarts recording.
• When an unfinalized disc is inserted and this button is
pressed, playback of the most recent title starts.
• The PLAY indicator is lit up in Recording and Playback
modes.
bFWD button and indicator
• Press this button during playback or fast-reverse mode
to start fast-forward play. If pressed during fast-forward
play, this button toggles the speed of fast-forward play
between low speed and high speed.
• Press this button in still mode or during slow-reverse
play to start slow-forward play. If pressed during slow-
forward play, this button toggles the speed of slow-for-
ward play between low speed and high speed.
• The FWD indicator is lit up during fast-forward and slow-
forward play.
cPAUSE button and indicator
• When this button is pressed while recording, the
recorder enters the recording pause mode.
• If this button is pressed during playback, the DVD
recorder switches to Still mode and freezes playback. If
the PAUSE button is then pressed again in Still mode,
the DVD recorder will advance playback by a single
field.
• The PAUSE indicator is lit up in Recording Pause and
Still modes.