Playback; Playing Back A Disc - JVC BD-X201MS Manual De Instrucciones

Playback

Playing Back a Disc

It is possible to playback a disc recorded on this DVD recorder.
Playback operation may vary according to whether finalization has been performed.
Playing Back a Disc before Finalizing
PAUSE button
STOP button
PLAY button
Clearing Resume Data
• When the PLAYBACK&232C TYPE item
on the SYSTEM MENU (1/2) screen is set
to DVD, resume data will be cleared and
the stop position will return to the begin-
ning of the last title if the STOP button is
pressed when in the Stop mode.
• When the PLAYBACK&232C TYPE item
is set to VTR, resume data will not be
cleared even if the STOP button is
pressed when in the Stop mode.
• Resume data will be cleared upon ejecting
the disc.
Playing Back a Finalized Disc
When a disc is finalized, its title menu will be used to create the top menu.
Set PLAYBACK NAVIGATION of the SYSTEM MENU (2/2) screen to ON.
The action taken by this DVD recorder when playback of a title has ended will depend on the settings of TITLE END as set on the
DVD MENU screen during recording.
* The operation of a finalized disc is identical to that of an unfinalized disc when PLAYBACK NAVIGATION of the SYSTEM
MENU (2/2) screen is set to OFF.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been
finalized.
All manuals and user guides at all-guides.com
Operation
1.
Insert the disc.
2.
Play the disc.
Press the PLAY button.
• The final title is played.
3.
Select still mode.
Press the PAUSE button.
• The machine enters still mode.
• If the PAUSE button is then pressed again in Still mode, the DVD recorder
will advance playback by a single frame.
4.
Restart the play.
Press the PLAY button.
Upon reaching a title end, it will automatically jump to the next title and
play back all titles.
When disc end is reached it will automatically enter stop mode.
Stop position may vary according to settings of the PLAYBACK & 232C TYPE
item on the SYSTEM MENU (1/2) screen. (X Page 68)
When set to DVD : Beginning of last title
When set to VTR : Position set for AUTO REW (Beginning of first title or 3
5.
To manually stop playback press the STOP button.
When the STOP button is pressed, the stop position will be registered and the
next playback will start from the same position. (Resume feature)
Note
In addition to the above procedure, the title list can be used to play back a disc.
For details, refer to page 59.
PAUSE
STOP
PLAY button
seconds before end position)
Cursor buttons
SET button
TOP MENU button
E-57