Setup Menu; Setting The Setup Menu - JVC BD-X201MS Manual De Instrucciones

Setup Menu

Setting the Setup Menu

Settings made in the setup menus are stored in this DVD recorder's internal memory and will be retained even when the power is
turned off.
In addition to the buttons on the front panel, a keyboard can also be used to perform operations on these menus. The following
section, however, will describe operations performed using the front panel buttons.
Keyboard:Select using the arrow keys (x and y), and confirm the selection using the Enter key.
Cursor buttons
(M, N, L and K)
SET UP button
SET button
Setup Menu
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
EXIT
RECORDER MENU (1/2) screen
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
All manuals and user guides at all-guides.com
Settings
Setup menu operations are carried out while monitoring the display on the moni-
tor connected to the VIDEO LINE OUT or Y/C OUT terminal. In addition, setup
menu content also appears on the LCD display.
Stop the DVD recorder.
1.
Open the Setup Menu screen.
To do this, press the SET UP button.
2.
Open the setup menu in which settings are to be modified.
1Use the M and N buttons to select the required screen.
2Press the SET button.
* The EXIT option can be selected to return to the normal screen display.
3.
Make the required settings in the setup menu.
1Use the M and N buttons to select the parameter to be set.
2Press the SET button.
• A list of setting values will appear.
3Use the M and N buttons to select the required value from the list and
then press the SET button.
• The setting value will be modified accordingly.
4Repeat steps 1 through 3 until all of the required settings have been
made.
To return to the Setup Menu, select MENU and press the SET button.
To move to the next menu screen, select the r button at the top of the current
screen and press the SET button.
MANUAL
Every05Min
To return to the original menu screen, select either MENU or BACK and press
ON
SP
the SET button.
DOLBY DIGITAL
4.
Use either of the following methods to return to the normal screen dis-
play.
Press the SET UP button.
or
Select EXIT from the Setup Menu and press the SET button.
Note
When a CD-R/RW disc is inserted, only DISC MENU is displayed.
MANUAL
AUTO
SP
DOLBY DIGITAL
Setting list
E-63