Recording Still Images Of Input Video To Cd-R/Rw - JVC BD-X201MS Manual De Instrucciones

Recording & Viewing Still Images (JPEG)

Recording Still Images of Input Video to CD-R/RW

When an unfinalized CD-R/RW is inserted, any still image of the input video (E-E image) can be recorded to the disc. The disc
needs to have sufficient available space. You can record up to 1000 still image (JPEG) files to one disc.
Refer to the following flowchart for the operating procedure.
• For a CD-RW, use the DVD recorder to do a full erase beforehand. (X Page 29)
• Input a video signal and set the DVD recorder to Stop mode.
Or FOOT SW 2
terminal
Capture still images.
If the REC button is pressed or a signal is input to the FOOT SW 2 terminal on the rear panel in Stop mode, the still image dis-
played at that point in time is captured to the internal memory of the DVD recorder.
If you want to use the FOOT SW 2 terminal, set FOOT SW 2 of the REMOTE MENU (1/2) screen to other than OFF.
(X Page 75)
Record still images (JPEG) saved to memory to the disc.
At the following times, the still image (JPEG) files saved to memory are automatically written to the Image folder on the disc.
• When FILE VIEWER is started by pressing and holding the SET UP button for at least 2 seconds.
FILE VIEWER: A program for viewing still images (JPEG) recorded to discs. (X Page 45)
• When the disc is ejected.
A file name such as the following is assigned to each still image.
File Number_Recording Year/Month/Day/Hour/Minute/Second.jpg (Example: 0001_20060315102030.jpg)
Recording Year/Month/Day/Hour/Minute/Second: The date and time the still image was captured
Switching the DVD recorder to OPERATE OFF mode clears the still image data stored in the internal memory of the DVD
recorder. If you do not want to record the data to the disc, press the OPERATE button in Stop mode. (State when a disc is
inserted)
E-44
All manuals and user guides at all-guides.com
Unfinalized CD-R/RW with available space
Stop mode
Input video (E-E image)
REC button
REC button
REC button
Press and hold the SET UP button for at least 2 seconds
(to start FILE VIEWER) or press the CLOSE/OPEN button
(to perform the disc eject operation)
Records the data to the Image folder on the disc
Finalize
The still images (JPEG) can be viewed on a PC, etc.
Saved to this DVD
recorder's memory
Still image
Capture 1
Still image
Capture 2
Still image
Capture N
If the OPERATE button is
pressed, the still image files
are cleared from memory and
this DVD recorder enters
OPERATE OFF mode.