On-Screen Content; Status Messages - JVC BD-X201MS Manual De Instrucciones

On-Screen Content

In addition to E-E and playback screens, the monitor connected to the DVD recorder's VIDEO LINE OUT terminal can display the
following.

• Status messages

• Event messages
• Alarm messages
• The Setup Menu (X Page 63)
Status Messages
The DVD recorder's setting condition and operation status are indicated by status messages, and these messages are displayed
on E-E or playback screens.
The DISPLAY MENU screen can be used to indicate whether or not status messages are to be displayed.
DISPLAY MENU screen
DISPLAY MENU
MENU
DISPLAY
TITLE/CHAPTER/INDEX
RECORDER MODE
TIME/DATE
REMAIN
DATE STYLE
LCD
No.
1 Operation Mode
All manuals and user guides at all-guides.com
To display status messages:
Set DISPLAY from the DISPLAY MENU screen to ON.
The various items of status information for display can be selected.
ON
If DISPLAY is set to OFF, no status information will be displayed.
TITLE+CHAPTER
ON
TIME+DATE
ON
MM/DD/YY
TITLE+CHAPTER
04/05/06
3
11:20:00
Item
This area indicates the DVD recorder's current mode of operation.
Use RECORDER MODE from the DISPLAY MENU screen to indicate whether or not
this is to be displayed.
NO DISC
EJECT
STOP
REC
REC PAUSE
PLAY
STL
FWD >>
FWD >>>
REV <<
REV <<<
SLOW FWD >>>
SLOW FWD >>
SLOW REV <<<
SLOW REV <<
LOADING
RESTORE
LCD Display and On-Screen Content
4
Status Messages
000 min
DVD-RW
REC
TITLE 01 0:11:22
CHAPTER 01 0:11:22
5
Description
: The DVD recorder currently contains no disc.
: The current disc is being ejected.
: Stop mode
: Recording mode
: Recording Pause mode
: Playback mode
: Still mode
: Fast-forward playback (low speed)
: Fast-forward playback (high speed)
: Fast-reverse playback (low speed)
: Fast-reverse playback (high speed)
: Slow-forward playback (high speed)
: Slow-forward playback (low speed)
: Slow-reverse playback (high speed)
: Slow-reverse playback (low speed)
: A disc is being loaded.
: Disc recovery in progress. (X Page 41)
Data relevant to record-
ing:
If the SET UP button is
pressed while in Record-
ing mode, the video
encode quality and the
audio encoding format will
be displayed. If the SET
UP button is then pressed
once again, this informa-
tion is removed from the
screen.
1
2
E-17