Info Menu; Language Change Menu; Work Hours Menu; Bms Configuration Menu - Hitecsa Advance EQS Serie Manual Del Usuario

The main window shows the description of the triggered alarm, as well as date/
time of the alarm and the machine status at the time.
With the UP and DOWN keys, it is possible to scroll through the old alarms.
The details of the displayed alarm can be viewed with the ENTER key.
Scroll the detail screens with the UP and DOWN keys.
I.3.7

Info Menu

It is possible to retrieve main information regarding the software version and type
of board installed from the Info menu.
USM_CONTROL EQS_2335a21275_208549_210701_ES-EN-FR-DE-IT
General description of hardware and
software implemented in unit
General description of hardware and
software implemented in unit
General description of machine
configuration
I.3.8

Language change menu

The language selection menu enables you to select the language to use in all
screens of the software.
Choose the language with the UP and DOWN arrows and then press Esc to quit.
I.3.9

Work hours menu

It is possible to view the total accumulated operating hours of each compressor
and the number of start-ups it underwent from the operating hours menu.
When a compressor exceeds the limit threshold of work hours, the non-blocking
alarm Maintenance required is triggered, which may only be reset by maintenance
performed by a HITECSA technical assistance centre.
I.3.10

BMS Configuration Menu

72
CONTROL EQS
Compressor operating hours
Number of compressor start-ups
Compressor operating hours
Number of compressor start-ups
Work hours accumulated since the last
service
Work hours limit for maintenance
request