Section Ii: Hardware Configuration; Description Of The Boards; Master And Slave Card With Integrated Evd Driver - Hitecsa Advance EQS Serie Manual Del Usuario

II

SECTION II: HARDWARE CONFIGURATION

II.1

DESCRIPTION OF THE BOARDS

II.1.1

Master and slave card with integrated EVD driver

USM_CONTROL EQS_2335a21275_208549_210701_ES-EN-FR-DE-IT
Connector for the power supply [G (+), G0 (-)]
1
pLAN address key, 7 segment display and LED
2
(power on and overload terminal +Vdc);
Additional power supply for terminal and ratiometric
3
probes 0...5 V;
Universal analogue inputs NTC, 0...0 V, 1...10 V
4
ratiometric, 0...0 V, 5...20 mA, 20...4 mA;
Passive analogue inputs NTC, PT1000, ON/OFF;
5
Analogue outputs 0...10 V;
6
Digital inputs at 24 Vac/Vdc;
7
Digital inputs 230 Vac or 24 Vac/Vdc;
8
Connector for synoptic terminal (external panel with
9
direct signals)
Connector for all standard terminals of pCO series
10
and for download of application program
Digital outputs relay
11
Connector for local pLAN network
13
Door for inserting optional serial card for supervisor
14
(BMS1)
Door for inserting optional field card (Fieldbus1)
15
Connector for BMS2
16
Fieldbus2 connector
17
Built-in terminal (LCD, keys and LED)
18
USB Host and Slave connector
19
Electronic Valve connector (only on Master board)
20
Valve driver analogue and digital inputs (only on
21
Master board)
External power supply from EVbat module (only on
22
Master board)
76
CONTROL EQS