Riester ri-focus LED Instrucciones Para El Uso página 28

The ri-focus LED headlights and clar N LED head mirrors are intended for use in the electromagnetic environment specified below. The customer or user of the
headlight should ensure that it is used in such an environment.
Immunity test IEC 60601 test level
IEC 61000-4-6 Not applicable
Conducted RF distur-
bances according to
IEC 61000-4-6
Emitted RF 10V/m
IEC 61000-4-3 80 MHz to 2,7 GHz
Proximity fields of
wireless RF commu-
nications equipment
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. The electromagnetic propagation is affected by absorption and reflection by structures, objects and
people.
a.Field strengths of fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM broadcast
and television transmission cannot be theoretically predicted with accuracy. To evaluate the electromagnetic environment based on fixed RF transmitters, an
electromagnetic assessment should be considered. If the measured field strength at the location where the headlight is used exceeds the above-mentioned RF
degree of compliance, the headlight should be observed to ensure normal operation. If abnormal performance is observed, additional measures may be required,
such as reorienting or moving the headlight.
Guidelines and manufacturer's declaration – electromagnetic immunity
Compliance
Not applicable
10 V/m
Electromagnetic environment - guidance
Portable and mobile RF communications equipment should not be used closer
to the ri-focus headlight and clar N, including the cables, than the recommen-
ded distance, which is calculated using the equation applicable to the transmit-
ter frequency. Recommended separation distance.
d= 1.2 x P 80 MHz to 800 MHz
d= 2.3 x P 800 MHZ to 2.7 GHz
Where P is the maximum output power of the transmitter in watts (W) accor-
ding to the transmitter manufacturer and the recommended distance in me-
ters (m). Field strengths of fixed RF transmitters, determined by an electro-
magnetic site survey, should be lower than the compliance standard in each
frequency range. Interference may occur in the vicinity of devices marked with
the following symbol:
28