Riester ri-focus LED Instrucciones Para El Uso página 16

Table of Contents
1. Introduction
1.1 Important information prior to use
1.2 Safety symbols
1.3 Packaging symbols
1.4 Intended use
1.4.1 Indication
1.4.2 Contraindication
1.4.3 Intended patient population
1.4.4 Intended operators/users
1.4.5 Required skills/operator training
1.4.6 Environmental conditions
1.5 Warnings/caution
1.6 User responsibility
1.7 Scope of delivery
2 First use of the device
2.1 Purpose
2.2 Preparing headlights and head mirrors for use
2.3 Use and function
2.3.1 Adjusting the headband
2.3.2 Adjusting the ri-focus® lamp head LED
2.3.3 Inserting the (rechargeable) batteries into the ri-focus® LED and clar N
2.3.4 Powering the ri-focus® LED and clar N on and off.
2.3.5 Battery compartment cover
2.3.6 Focusing the ri-focus® LED
2.3.7 Replacing the headlight/head mirror
2.3.8 Replacing the bulb
2.3.9 Using the charger
2.3.10 Technical specifications
2.3.11 Replacing the headband padding
2.3.12 Care instructions
3 Spare parts
4 Technical specifications
5 Maintenance
6 Disposal
7 Disposal of packaging
8 Accompanying documents on electromagnetic compatibility according to IEC 60601-1-2
8.1 EMC (electromagnetic compatibility)
8.2 Disposal
9 Warranty
1 Introduction
1.1 Important information prior to use.
You have purchased a high-quality Riester product, which has been manufactured in compliance with Directive (EU) 2017/75 and is subject to the strictest quality cont-
rols at all times. Read these instructions for use (IFU) carefully before using the device and keep them in a safe place. If you have any questions, we are available at any
time, and our contact information is provided at the end of this IFU. Contact information for distribution and sales partners can be obtained up on request. Please note
all instruments described in these instructions for use may only be used by appropriately trained personnel. The safe functioning of this device is only be guaranteed
if Riester original parts and accessories are used.
16