S
ETTING THE
At the handset
1. Make sure the handset is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays SET TIMER 00 MIN 00 SEC , and the first digit
(minutes) blinks in the display.
4. Press the desired number 0-9.
5. After the first digit is entered, the second digit blinks.
6. Continue entering digits for the number of seconds you want to set.
At the Spacemaker
1. Make sure the speakerphone is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays SET TIMER 00 MIN 00 SEC , and the first digit
(minutes) blinks in the display.
4. Press CID VOL(-) arrow key to change the value of the blinking digit.
5. Press CID VOL(+) arrow key to blink the next digit.
6. Continue entering digits for the number of seconds you want to set.
NOTE: Maximum timing period is 99 minutes 99 seconds, while one
minute equals 60 seconds.
S
TARTING THE
When the countdown time is set,
1. Press the timer button to start counting down. You will hear a
confirmation tone.
2. When the countdown time expires, TIMER ON 00 MIN 00 SEC shows in
the display, and an alarm sounds for two minutes.
S
TOPPING THE
When the phone is OFF (not in TALK mode), press the TONE*/exit button
(handset) or the EXIT button (Spacemaker® unit) to stop the countdown
and return to standby mode.
NOTE: The handset timer stops automatically if the battery
charge is low or empty.
40
T
IMER
®
unit
T
IMER
T
IMER