Making A Call; Ine In Se - GE SPACEMAKER 26976 Guia Del Usuario

when pressing the TALK button, it may not be properly registered. Follow
these steps to re-register the handset to the wall base unit:
1. Make sure both the handset and Spacemaker® speakerphone are OFF
(not in TALK mode).
2. Press and hold the format button on the handset until you hear a beep
and PRESS AND HOLD BASE PAGE KEY shows in the display.
3. Move the handset close to the wall base unit.
4. Press and hold the page button on the wall base unit.
NOTE: You must press the page button on the wall base unit within
30 seconds to continue registration.
5. You will hear a confirmation tone when the registration is complete,
and the handset's display shows REGISTERED .
R
ECEIVING A
1. Press TALK/CALLBACK button and begin speaking.
2. When finished, press TALK/CALLBACK again to hang up.
M C
AKING A
1. Press TALK/CALLBACK button, when you hear a dial tone, dial a
telephone number.
OR
Dial the phone number first, then press the TALK/CALLBACK button.
2. When finished, press the TALK/CALLBACK button again to hang up.
L U
INE IN SE
When the Spacemaker® speakerphone is ON (in TALK mode), LINE IN
USE shows in the display of the handset if it is OFF (not in TALK mode).
3-W C
AY ONFERENCING
When the Spacemaker® speakerphone is engaged with an external call
( LINE IN USE shows in the handset display), press the TALK/call back
button on the handset to start the 3-way conference.
NOTE: If the handset is ON, press the speaker button on
Spacemaker®. The speakerphone will join the call, too.
24
C
ALL
ALL