Automatic Switchover Of Weighing Range; Automatic Calculation Of Bmi Or Bsa - Seca 651 Manual De Instrucciones

Automatic switchover of weighing
Automatic calculation of BMI or
86 • seca 651/650
3. To deactivate the function, proceed as follows:
a) Remove the weight from the weighing platform
b) Press the PT key
c) Clear the value with the
The set additional weight is no longer displayed.
The function is deactivated.
After the scale is switched on, weighing range 1 is active. If a particular weight
value is exceeded, the scale automatically switches to weighing range 2.
range
► To switch back to weighing range 1, completely remove the weight from
the scale.
Weighing range 1 is active again.
BSA Device mode
The device automatically calculates the Body Mass Index (BMI) or the Body
Surface Area (BSA) according to its default setting ➔
Waist circumf., page
► Determine the weight and height of the patient.
► ➔
Measuring weight, page 82
► ➔
Entering the height manually, page 83
► ➔
Using extended weighing functions, page 83
Either the BMI or the BSA is calculated automatically according to the
default setting.
key
Basic
Advanced
Expert
Service
91.
Function available
•
•
•
•
Selecting BMI/BSA/