Display Message Traffic Light System; Error Codes; Servicing; Calibrated Scales (Read Off Calibration Counter And Gal Value) - Seca 651 Manual De Instrucciones

10.4 Display message traffic light system

Symbol

10.5 Error codes

11.SERVICING

11.1 Calibrated scales (read off calibration counter and GAL value)

Green:
Action successful, e.g. data submitted to EMR System or
seca analytics 125
Yellow:
Incorrect operation or malfunction, can be remedied by the user with the aid
of the error tables in these instructions for use ➔
page 102.
Red:
Device error that cannot be remedied by the user. Inform seca Service.
420 - 288BA - 555
We recommend having your device serviced prior to verification.
NOTICE!
Incorrect measurements as a result of poor servicing
► Have servicing and repairs carried out exclusively by seca Service or
► You can find service partners in your area at www.seca.com or by
Have an authorized technician perform verification according to national legal
regulations.
Verification is necessary whenever one or more verification seals are dam-
aged or the contents of the verification counter no longer match the number
on the applicable verification counter sticker. If verification seals are dam-
aged, contact seca Service directly.
Verifications may only be performed by authorized agencies. To guarantee
this, the scale is equipped with a verification counter to record any change in
verification-related data. The GAL value used by the device can also be read
off.
If you want to check whether the scale has been properly verified, proceed as
follows:
Description
software
Model number; here:
seca mBCA 555/554
Firmware version of the assembly concerned; here:
Index "A"
Hardware version of the assembly concerned; here:
Index "B"
Assembly concerned; here: 288 = interface module
Error number; here: 420 = no connection to the server
by an authorized service partner.
sending an e-mail to service@seca.com.
English
Troubleshooting,
scale
Servicing • 105