Measuring; Activating The Autohold Function - Seca 651 Manual De Instrucciones

7.2 Measuring

Activating the Autohold function

90 • seca 651/650
3. Press the Manual item.
A QR code is displayed.
4. Scan the QR code (e.g. with your smartphone or tablet).
This takes you to the www.seca.com/support website, where you can
download the instructions for use.
Device mode
Basic
Advanced
Expert
Service
If you activate the Autohold function, it is no longer necessary to manually
activate the Hold function for each individual measurement procedure.
NOTE
This function is activated at the factory on some models. The function
can be deactivated.
1. Press the key.
The Settings menu is displayed.
2. Press the or
3. Select the desired setting:
– Function activated
– Function deactivated
4. To exit the menu, press the
Function available
key until the Autohold menu item is displayed.
key.
–
•
•
•