Setting The Date Format; Setting The Standby Time - Seca 651 Manual De Instrucciones

Setting the date format

Setting the standby time

Device mode
Basic
Advanced
Expert
Service
The format in which the patient's date of birth is displayed can be set.
1. Press the key.
The Settings menu is displayed.
2. Press the or
3. In the Display menu, select the Date format item.
4. Press the desired date format.
The setting is active.
5. To exit the menu, press the
Device mode
Basic
Advanced
Expert
Service
The period of time after which the multifunctional display goes off (standby)
can be set.
WARNING!
Electric shock
The device is not de-energized when the display goes off.
► The device is not equipped with an on/off switch. Remove the
power supply connector if the device has to be de-energized, e.g.
for hygiene processing or maintenance work.
1. Press the key.
The Settings menu is displayed.
2. Press the or
3. In the Display menu, select the Standby item.
Function available
key until the Display menu item is displayed.
key.
Function available
key until the Display menu item is displayed.
English
–
•
•
•
–
•
•
•
Configuration • 93