Setting Up The Device In The; Seca Connect 103 Software - Seca 651 Manual De Instrucciones

Setting up the device in the

seca connect 103 software

96 • seca 651/650
The following requirements must be met to be able to assign measured val-
ues to an electronic patient file in an EMR System or the
software:
• Device is set up in the
• Device is connected to your network via a LAN or WiFi connection
• An interface is set up in the
System or the seca analytics 125
• Barcode scanner is connected to the device
On connection to an EMR System, the measurement procedure consists of
the following steps:
• Record ID(s) using barcode scanner
• Record measured values on the device
• Use the
seca connect 103
to the EMR System
NOTE
The measurement procedure (workflow settings) can be individually
adapted in the
seca connect 103
For data transmission between the device and your EMR System, the device
must be set up in the
seca connect 103
lowing data must be entered:
• Device name
• Setup location
• Workflow settings (measurement procedure)
• Address of the
seca connect 103
• Network port
1. Set up the device in the
system instructions for use for the
The software generates a QR code containing the entered information.
2. Make sure that a barcode scanner is connected to the device
➔
Connecting a barcode scanner (optional), page
3. Scan the QR code from the software user interface or a paper printout.
The settings carried out in the
the device.
4. You have the following options for continuing:
► LAN: Connect the device to the network using a LAN cable
► WiFi: ➔
Connecting the device to the WiFi network
(seca connect 103), page 98
NOTICE!
Malfunction
To be able to transmit measuring results to an EMR System, an inter-
face must be set up between the
EMR System.
► Observe the system instructions for use for the
► Set up the interface in cooperation with the manufacturer of your
EMR System.
software
seca connect 103
seca connect 103
software
software to transmit the measuring results
software.
software. Amongst others, the fol-
server
software as described in the
seca connect 103
seca connect 103
seca connect 103
seca connect 103
seca analytics 125
software to your EMR
seca
software
software.
78.
software are stored in
software and the
seca connect 103 .