Permanently Storing Additional Weight (Pre-Tare) - Seca 651 Manual De Instrucciones

Permanently storing additional
weight (pre-tare)
4. Wait until the weighing value has stopped flashing.
The Hold message appears.
5. To deactivate the function, press the Hold key.
The Hold message is no longer displayed.
NOTE
When the Autohold function is activated, the weight value is automat-
ically displayed permanently as soon as a stable measuring result has
been achieved ➔
Activating the Autohold function, page
Device mode
Basic
Advanced
Expert
Service
The Pre-tare function can be used to permanently save an additional weight
and automatically subtract it from a measuring result, e.g. a flat-rate figure for
shoes and clothing.
1. To activate the Pre-tare function, proceed as follows:
a) Remove the weight from the weighing platform
b) Press the PT key
c) Enter the value
d) Confirm the value with the
The set additional weight (here: 1.5 kg) is displayed with a minus sign in
front.
The messages "NET" and "PT" are displayed.
2. Ask the patient to step onto the scale.
The patient's weight is displayed.
The saved additional weight has been deducted automatically.
English
90.
Function available
–
•
•
•
key
Operation • 85